If you have found mold in a Lilburn basement, the first job is to stop feeding it: find the leak, seepage or humidity behind it and start drying. Small patches on hard surfaces can be cleaned, but finished basements usually need moldy drywall, carpet and trim removed. Call the number on this page to be connected with a local mold remediation company in Lilburn.

Lilburn at a glance
Lilburn is a Gwinnett County city about 17 miles from Atlanta, stretched along US 29 with its revitalized Old Town district near Main Street. Like much of the metro, it sits on red clay that holds water after storms, and homes built into sloping lots often have a basement or a lower level with one wall underground. That buried wall, plus humid summer air, is where most basement mold starts.
What to do now
- Find the water. Check the walls after rain, look under the water heater and washer, and feel carpet near exterior walls for dampness.
- Dry what you can. EPA says wet materials should be dried within 24 to 48 hours. Run fans and a dehumidifier, and pull up soaked rugs.
- Leave large patches alone. EPA puts the do-it-yourself limit at roughly 10 square feet. Beyond that, scrubbing or sanding spreads spores.
- Do not cover it. Paint and caulk over mold hide the problem; EPA says not to do it.
- Keep sensitive people out. Anyone with asthma or a weakened immune system should stay away from the area.
- Photograph everything. Pictures help the remediation company scope the job and help with any claim.

Reading the signs
| What you see | Likely cause |
|---|---|
| Dark spots along the bottom of drywall | Moisture wicking up from the slab or seeping at the wall base |
| Wet patch on one wall after storms | Gutter, downspout or grading sending water to the foundation |
| Mildew on stored items, no visible leak | High summer humidity and poor air movement |
| Stain spreading from a corner near the water heater | Slow plumbing or appliance leak |
| Musty smell with clean-looking walls | Growth inside the wall cavity or under carpet pad |
What moves the price
Angi's Atlanta cost guide reports basement mold remediation at $587 to $3,522, and most pros there charge about $12 to $29 per square foot. The amount of finished wall and flooring that must come out matters most, followed by access, how long containment stays up, and whether drywall or carpet replacement is in the same bid. For rebuilding inside city limits, ask the City of Lilburn Business Services Department about building permits, and check any contractor's license on GOALS Verify Now.
Basement Mold Removal questions in Lilburn
Can I clean basement mold myself?
Is the white, powdery crust on my basement wall mold?
Will the county health department inspect basement mold?
Do I need a permit to rebuild basement walls after mold removal?
More mold services in Lilburn
Basement Mold Removal nearby
Sources
- EPA: Mold Cleanup in Your Home
- EPA: A Brief Guide to Mold, Moisture and Your Home
- EPA: Homeowner's and Renter's Guide to Mold Cleanup After Disasters (pdf)
- Angi: Mold Remediation Cost in Atlanta, GA
- City of Lilburn: Building and trade permits
- GNR Health: Environmental health complaints
- Georgia DPH: Indoor Air Quality/Mold
- Georgia SOS GOALS: Verify Now
- Lilburn, Georgia (Wikipedia)
Last updated: